|
Climate Chambers, CO2 LN2 Chambers, Temperature Chambers, Bench Top Temperature Chambers |
CC |
898J |
DELTA DESIGN |
9023-1-1-1 |
10 |
7 |
7 |
|
Delta Design CO2 Test Chamber
Model #9023-1-1-1
SPECS:
I.D. 10"W X 7"D X 7"H
O.D. 18"W X 24"D X 13"H
Temperature Range: -70 to +270 Deg. C - CO2 Cooled
New Watlow programmable control
Stainless Steel Interior
3.75" Dia. Floor Hole
Power: 120V, 20 Amps
Stock #898J
|
Spec sheet: 
|
|
|
High Vacuum Ovens, Vacuum Ovens |
BV |
891J |
NAPCO |
5861 |
18 |
24 |
18 |
|
Used / Refurbished Napco Vacuum Oven
Model #5861
SPECS:
I.D. 18"W X 24"D X 18"
O.D. 26"W X 42"D X 34"H
Maximum Temp: 200 Deg. C
NEW Digital Controller In Side Mounted Box
Stainless Steel Interior, Viewing Window
Power: 120V, 1Ph, 15 Amps
Stock #891J
|
|
|
|
Industrial Ovens, Powder Coating Ovens, Walk In Ovens |
NO |
ST01 |
|
ST216 |
72 |
72 |
72 |
|
NEW Walk In Oven Model #ST216
216 Cubic Ft of Interior Space
SPECS:
I.D. 72"W X 72"D X 72"H
O.D. 97"W X 82"D X 95"H
Temperature: +5 to +500 Deg. F
Aluminized Steel Interior, Double Doors With Slam Latches
Single Set Point Temperature Controller
Fan Cooled, UL Listed
VIEW ATTACHED .PDF FOR DETAILED SPECS
AND AVAILABLE OPTIONS
Stock #ST01
|
Spec sheet:
|
|
|
Production Chambers, Temperature Chambers |
CT |
858J |
ESPEC |
HC-120 |
15 |
12.6 |
3.9 |
|
Espec Rapid Rate Thermal Cycle Chamber
Model #HC-120
SPECS:
I.D. 15"W X 12.6"D X 3.9"H Drawer
O.D. 33"W X 42"D X 45"H
Temperature Range: -60 to +150 Deg. C - Air Cooled
Ramp Rate: 6 to 9 Deg. C Per Min. +150 to -60
Environmentally Friendly Refrigerants, Stainless Steel Interior
Power: 220V, 3Ph
Stock #858J
For Sale, This Compact Espec Rapid Rate Thermal Cycle Test Chamber. Used for testing products that require high environmental stress. Products such as Automotive Components, Solid State Devices, SemiConductor Devices or even testing Surface Solder Mountings. With a Ramp Rate of 6 to 9 Deg. C Per Minute this Thermal Cycle Chamber can subject your product to Extreme Environmental conditions in a short amount of time. This Compact Unit Has the Original Espec Programmer for controlling your test parameters, and the smaller size takes up less lab space. By purchasing PreOwned / Warranteed Test Chambers from LR Environmental you will also save money!
|
|
|
|
AGREE Chambers, CO2 LN2 Chambers, Production Chambers, Temperature Chambers |
CA |
879J |
THERMOTRON |
F32LN2 |
40 |
40 |
36 |
|
Thermotron LN2 AGREE Chamber Model #F32LN2
SPECS:
I.D. 40"W X 40"D X 36"H
O.D. 71"W X 54"D X 94"H
Temperature Range: -70 to +170 Deg. C - LN2 Cooled
Watlow Model #F-4 Programmer
Over and Under Temperature Protection
Stainless Steel Interior
Honeywell Truline Recorder
4X 2.75" Dia. Feed-Thru Ports, 1X 5.75" Dia. Feed-Thru Port,
2X 6" Dia. Feed-Thru Port
Power: 480V, 3Ph, 45 Amps
Stock #879J
|
Spec sheet:
|
|
|
Furnaces, Batch Ovens, Bench Top Ovens, Industrial Ovens, Curing Ovens, Heat Treat Ovens, Hi Temp Ovens, Laboratory Ovens, Mechanical Convection Ovens, Cabinet Ovens |
NO |
FO93 |
YAMATO |
FO810CR |
11.8 |
15.7 |
9.8 |
|
High Temperature Oven - Yamato Muffle Furnace / Oven Model #FO810CR
MUFFLE FURNACE / OVEN SPECS:
I.D 11.8"W X 15.7"D X 9.8"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 1Ph, 20 Amps
Stock #FO93
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO92 |
YAMATO |
FO710CR |
10.6 |
13.7 |
9.8 |
|
Yamato Muffle Furnace Model #FO710CR
MUFFLE FURNACE SPECS:
I.D. 10.6"W X 13.7"D X 9.8"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 1Ph, 18 Amps
Stock #FO92
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO91 |
YAMATO |
FO610CR |
9.8 |
13.7 |
7.8 |
|
Yamato Muffle Furnace Model #FO610CR
MUFFLE FURNACE SPECS:
I.D 9.8"W X 13.7"D X 7.8"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 1Ph, 15 Amps
Stock #FO91
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 Deg. F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + -2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO90 |
YAMATO |
FO510CR |
11.8 |
9.8 |
5.9 |
|
Yamato Muffle Furnace Model #FO510CR
MUFFLE FURNACE SPECS:
I.D 11.8"W X 9.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 1Ph, 12 Amps
Stock #FO90
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO89 |
YAMATO |
FO410CR |
7.8 |
11.8 |
5.9 |
|
Yamato Muffle Furnace Model #FO410CR
MUFFLE FURNACE SPECS:
I.D 7.8"W X 11.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 1Ph, 10.5 Amps
Stock #FO89
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO87 |
YAMATO |
FO300CR - FO310CR |
7.8 |
9.8 |
5.9 |
|
Yamato Muffle Furnace Models #FO300CR 310CR
MUFFLE FURNACE SPECS:
I.D 7.8"W X 9.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 115V, 19 Amps
Or 220V, 9.5 Amps - Model #FO310CR
Stock #FO87
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO85 |
YAMATO |
FO200CR - FO210CR |
3.9 |
9.8 |
5.9 |
|
Yamato Muffle Furnace Models #FO200CR FO210CR
MUFFLE FURNACE SPECS:
I.D 3.9"W X 9.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 115V, 14.5 Amps
Or 220V, 7.5 Amps - Model #FO210CR
Stock #FO85
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + - 2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces |
FG |
FO83 |
YAMATO |
FO100CR - F0110CR |
3.9 |
5.9 |
3.9 |
|
Yamato Muffle Furnace Models #FO100CR FO110CR
MUFFLE FURNACE SPECS:
I.D. 3.9"W X 5.9"D X 3.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 115V, 10 Amps Or 220V, 5 Amps
Stock #FO83
The Yamato Standard muffle furnace uses a microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102F)
FEATURES OF THE YAMATO MUFFLE FURNACE:
Wide selection of space-saving compact units with maximum inner capacity
Easy to use controller
Excellent heat tightness with a firmly sealed chamber door
High temperature accuracy at + -2.0 Deg. C
Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns
Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device
Selectable options include exhaust system unit, N2 gas loading device (with flow meter), temperature output terminal, time up / alarm output terminal and sample tray
Upgraded with long life R-thermocouple sensors
Designed with communication port
|
Spec sheet:
|
|
|
Furnaces, Hi Temp Ovens |
FG |
FP82 |
YAMATO |
FP413 |
11.8 |
9.8 |
5.9 |
|
Yamato High Performance Furnace Model #FP413
MUFFLE FURNACE SPECS:
I.D. 11.8"W X 9.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: 220V, 18 Amps
Stock #FP82
High performance muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THIS YAMATO FURNACE:
The Yamato Furnace Comes With A High accuracy controller for better operability and visibility.
Excellent heat tightness with a firmly sealed chamber door.
High temperature accuracy at + - 1.0 Deg. C Upgraded with long life R-thermocouple sensors.
High quality alumina porcelain hot plate where heater is not
exposed to the inner chamber preventing contamination of samples.
Program operation of maximum 99 steps, 99 patterns, with repeat operation function.
Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device.
Optional items include exhaust system, N2 gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate.
|
Spec sheet:
|
|
|
Furnaces |
FG |
FP80 |
YAMATO |
FP303 - FP313 |
7.8 |
9.8 |
5.9 |
|
Yamato High Performance Furnace Model #FP303 & FP313
MUFFLE FURNACE SPECS:
I.D. 7.8"W X 9.8"D X 5.9"H
Maximum Temperature: 1150 Deg. C (2102 F)
Power: Model FP303 - 115V, 21.5 Amps
Model FP313 - 220V, 13.5 Amps
Stock #FP80
High performance muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Temperature range: +100 to +1150 Deg. C (2102 F)
FEATURES OF THIS YAMATO FURNACE:
The Yamato Furnace Comes With A High accuracy controller for better operability and visibility.
Excellent heat tightness with a firmly sealed chamber door.
High temperature accuracy at 1.0 Deg. C Upgraded with long life R-thermocouple sensors.
High quality alumina porcelain hot plate where heater is not
exposed to the inner chamber preventing contamination of samples.
Program operation of maximum 99 steps, 99 patterns, with repeat operation function.
Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device.
Optional items include exhaust system, N2 gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate.
|
Spec sheet:
|
|