New Laboratory Ovens > Gravity Ovens

Gravity / Natural Convection Ovens

A Gravity Oven may be the best choice for you depending on your application. Unlike a mechanical convection oven where air is pushed around by fans, hot air in a Gravity. Oven is circulated by natural convection. If you have lightweight materials or powders, a Gravity Oven will prevent the materials from blowing around and allow them to be heated fairly evenly. A Gravity Oven can also be an Economical Alternative for Basic Industrial Uses such as Drying or Baking. Perforated stainless steel shelves allow the heat to circulate freely throughout the chamber.

Yamato DVS Series Programmable Gravity / Natural Convection Ovens

New Yamato Gravity Convection Oven DVS-402C and DVS-412C

DVS-402C/DVS-412C

 
New Yamato Gravity Convection Oven  DVS-602C and DVS-612C

DVS-602C/DVS-612C

Yamato DX Series Standard Gravity / Natural Convection Ovens

New Yamato Gravity Convection Oven  DX-302C and DX-312C

DX-302C/DX-312C

New Yamato Gravity Convection Oven  DX-402C and DX-4312C

DX-402C/DX-412C

New Yamato Gravity Convection Oven  DX-602C and DX-612C

DX-602C/DX-612C


Inventory of New Gravity Ovens

Categories Class Stock No. Manufacturer Model No. Photo
Laboratory Ovens, Bench Top Ovens, Gravity Ovens NO DX37 YAMATO DX602C - DX612C Used YAMATO DX602C - DX612C Laboratory Ovens/ Bench Top Ovens/ Gravity Ovens

NEW Yamato Gravity / Convection Oven
Models #DX602C & DX612C

SPECS:
I.D. 23.6"W X 20"D X 19.6"H
Maximum Temperature: 280 Deg. C (536 Deg. F)
Power: 115V, 14 Amps - 220V, 6.4 Amps
Stock #DX37

OPERATION AND FUNCTIONS:
Highly practical standard ovens with maximum temperature up to 300 Deg. C
Standard type of natural convec-
tion constant temperature drying
ovens, with extensive features
and simple operation.
Performance and functions
Economical and cost saving
Easy to use and maintain
Excellent temperature accuracy
Digital PID controller for easy constant
operation with options of Fixed setting,
Quick Auto Stop, Auto Start, Auto Stop
operation
Increased safety and self-diagnostic
function
Calibration off-set function
Safety features
Temp sensor error, Temp input circuit
error, Auto overheat prevention,
Measured temp error, Circuit breaker
with over current protection
Spec sheet: YAMATO DX602C - DX612C Laboratory Ovens, Bench Top Ovens, Gravity Ovens spec sheet

Laboratory Ovens, Bench Top Ovens, Gravity Ovens NO DX35 YAMATO DX402C - DX412C Used YAMATO DX402C - DX412C Laboratory Ovens/ Bench Top Ovens/ Gravity Ovens

NEW Yamato Gravity / Convection Oven
Models #DX402C & DX412C

SPECS:
I.D. 17.7"W X 16.1"D X 15.7"H
Maximum Temperature: 300 Deg. C (572 Deg. F)
Power: 115V, 14 Amps / 220V, 6.4 Amps
Stock #DX35

OPERATION AND FUNCTIONS:
Highly practical standard ovens with maximum temperature up to 300 Deg. C
Standard type of natural convec-
tion constant temperature drying
ovens, with extensive features
and simple operation.
Performance and functions
Economical and cost saving
Easy to use and maintain
Excellent temperature accuracy
Digital PID controller for easy constant
operation with options of Fixed setting,
Quick Auto Stop, Auto Start, Auto Stop
operation
Increased safety and self-diagnostic
function
Calibration off-set function
Safety features
Temp sensor error, Temp input circuit
error, Auto overheat prevention,
Measured temp error, Circuit breaker
with over current protection
Spec sheet: YAMATO DX402C - DX412C Laboratory Ovens, Bench Top Ovens, Gravity Ovens spec sheet

Laboratory Ovens, Bench Top Ovens, Gravity Ovens NO DX33 YAMATO DX302C - DX312C Used YAMATO DX302C - DX312C Laboratory Ovens/ Bench Top Ovens/ Gravity Ovens

NEW Yamato Gravity / Convection Oven
Models #DX302C & DX312C

SPECS:
I.D. 11.8"W X 12.2"D X 11.8"H
Maximum Temperature: 300 Deg. C (572 Deg. F)
Power: 115V, 9.5 Amps / 220V, 4.3 Amps
Stock #DX33

OPERATION AND FUNCTIONS:
Highly practical standard ovens with maximum temperature up to 300 Deg. C
Standard type of natural convection
constant temperature drying
ovens, with extensive features
and simple operation.
Performance and functions
Economical and cost saving
Easy to use and maintain
Excellent temperature accuracy
Digital PID controller for easy constant
operation with options of Fixed setting,
Quick Auto Stop, Auto Start, Auto Stop
operation
Increased safety and self-diagnostic
function
Calibration off-set function
Safety features
Temp sensor error, Temp input circuit
error, Auto overheat prevention,
Measured temp error, Circuit breaker
with over current protection
Spec sheet: YAMATO DX302C - DX312C Laboratory Ovens, Bench Top Ovens, Gravity Ovens spec sheet

Laboratory Ovens, Bench Top Ovens, Gravity Ovens NO DR26 YAMATO DR200 Used YAMATO DR200 Industrial Ovens/ Laboratory Ovens/ Bench Top Ovens/ Gravity Ovens/ Hi Temp Ovens

NEW Yamato High Temperature Convection Oven
Model #DR200

SPECS:
I.D. 9.8"W X 9.8"D X 8.6"H
Temperature Range: +300 to +700 Deg. C
Power: 115/220V, 12/6.5 Amps

Stock #DR26

This Programmable Natural Convection Oven has a high accuracy control at high temperature range. Equipped with high operability temperature controller. Can be used as constant temperature oven, drying oven, and electric furnace for ashing, sintering, etc. as unit is suitable for each of these three functions. Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ?/? keys.
Easy programmable operation, fixed temperature, quick auto stop, auto stop and auto start. Has Lock Function, auto recovery after power failure, and calibration offset.

SAFETY FEATURES:
Failure of sensor, heater, SSR, memory, internal communication, temperature inputting circuit, automatic overheating prevention device, and measurement temperature.
Spec sheet: YAMATO DR200 Industrial Ovens, Laboratory Ovens, Bench Top Ovens, Gravity Ovens, Hi Temp Ovens spec sheet

Total Results: 4

Specifications

DVS402C DVS602C DX302C DX402C DX502C
Performance
Circulation method Natural convection
Operating temperature range Room temp.+5 to 260°C (no load at ambient temperature of 23°C) 40 to 300°C 40 to 280°C
Temp. control accuracy ±1.0°C(at 260°C : exhaust port closed) ±1.0°C(at 300°C : exhaust port closed) ±1.0°C(at 280°C : exhaust port closed)
Temp. uniformity ±5.0°C(at 260°C : exhaust port closed) ±10.0°C(at 300°C : exhaust port closed) ±10.0°C(at 280°C : exhaust port closed)
Max. temp. reaching time Approx. 90 min. (room temperature +5°C to 260°C) Approx. 45 min. Approx. 60 min. Approx. 80 min.
Components
Interior material Type 304 Stainless steel
Exterior material Cold rolled steel plate with melamine resin baking finish
Heat insulating material Rock wool
Heater SUS pipe heater Iron-chrome wire heater Iron-chrome wire heater
1.2 kW 1.36 kW 0.9 kW 1.5 kW
Exhaust port/Cable hole 1.2" I.D.×2 pcs.(the top) / 1.2" I.D.×1 pc.(right side) 1.2" I.D.×2 pcs.(the top)
Observation window 9.8" × 11", Tempered glass (0.12" thickness) none
Controller
Temp. controller 3 pattern-program controller, PlD control by microprocessor PlD control by microprocessor
Temp. setting method Operation menu key and Digital setting by ▲ ▼ key Digital setting by ▲ ▼ key
Temp display method Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function
Program mode
Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop,
Program operation : 3 pattern, 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop,
Additional functions Calibration off-set function, Key lock , Uninterruptible power for memory, Pattern repeat function Temp. memory
Heater circuit control SSR control Triac zero-cross control
Sensor K-thermocouple Platinum resistance bulb
Safe Device
Safety countermeasures Failure of sensor, heater SSR, memory, internal communication, temperature inputting circuit, Automatic overheating prevention device, overheating prevention device, measurement temperature error, Circuit breaker, Overheat prevention device Temperature sensor error, Temperature input circuit error, Auto overheating prevention, overheating prevention device, Measured temperature error, Circuit breaker, Hydraulic standalone overheating prevention device
Standard
Internal dimensions (W×D×H in) 17.7" × 19.3" × 17.7" 23.6" × 21.3" ×19.7" 11.8" × 12.2" × 11.8" 17.7" × 16.1" × 15.7" 23.6" × 20.0" ×19.7"
External dimensions (W×D×H in) 22" × 23.7" × 32.3" 28" × 25.6" × 34.3" 15.7" × 17.3" × 24.8" 21.6" × 21.2" × 28.7" 27.6" × 25.2" × 32.7"
Internal capacity 3.5 cu ft 5.7 cu ft 1.0 cu ft 2.6 cu ft 5.4 cu ft
Shelf plate with standard load Approx. 33 lbs/piece
Shelf rest step number 9 steps 12 steps 6 steps 9 steps 12 steps
Shelf rest pitch 1.2" 1.4"
Power source 50/60Hz 115V
single phase
11A
115V
single phase
12.5A
115V
single phase
8.5A
115V
single phase
13.5A
Weight Approx. 106 lbs Approx. 139 lbs Approx. 51 lbs Approx. 84lbs Approx. 123lbs
Accessories
Shelf plate Stainless steel, 2 pcs.
Shelf bracket 4 pcs.
Optional Accessories
  Stand / Fitting for stacking / Additional shelf plate / Cable hole/ Temp. output terminal / Time up out-put terminal etc. Independent overheating prevention / Electric leakage breaker / Stand / Additional shelf plate / Cable hole