Click Here For Complete Info On This Ready To Go CSZ 24″ X 24″ X 24″ Temperature Chamber
Author Archives: LR Environmental
Type of Water Used for Humidity Chambers
Humidity Chambers require water to create the humidity. But did you know that this water MUST be purified? The humidity heater, the boiler system and the interior of the humidity chamber can be damaged by using tap water. However, using a water supply that is TOO pure can also cause problems. Your humidity chamber can read improper humidity levels which can skew your test results or even damage your product.
You want the water you supply to your humidity chamber to be in the range of 0.5 to 2.0 Mega Ohms of resistivity. (Mega Ohms is a common measurement of water purity) When the purity goes above 2.0 Mega Ohms not only can test results be wrong, your elements, boiler, and integrity of the humidity chamber can deteriorate more quickly – shortening the lifespan of your humidity chamber. The water becomes too pure and begins to act as a solvent and can start causing metal corrosion. Lower resistances – such as city water – are also to be avoided. This water will have too many minerals which will leave deposits and can block pipes.
By using Demineralizer Cartridges you can easily extend the life of your humidity chamber. The filters will change color, alerting you that it is time to replace them and save the humidity chamber from damage. LR Environmental stocks replacement filters for fast shipment.
Water Recalculating Systems – which we offer – are also a great addition to your humidity chamber. These will contain the water supply eliminating the need to continually fill the chamber and no drainage system is required.
Temperature Test Chamber – Thermotron, One of the most well known Brands in the Industry
Thermotron Test Chamber
30″ X 30″ X 30″
-70 to +170 Deg. C
New Compressors – Equipment 100% Warranteed
Click Here For More Info: Stock #197J
3 Blue M Ovens Just In – Batch Ovens – Production Ovens For Your Lab
Blue M Lab Oven Model #ESP-400C-5
19″ X 15″ X 18
500 Deg. F
Stock #223J
Blue M Batch Oven Model #DC-206-MP556
20″ X 18″ X 20″
662 Deg. F
Stock #221J
Blue M Batch Oven Model #MP-206E – 2 Available
20″ X 18″ X 20″
650 Deg. F
Stock #220J
Thermotron Fast Ramp
Thermotron Fast Ramp Temperature Humidity Chamber, Model #SE-600-10-10
I.D. 40″W X 26″D X 33″H
O.D. 49″W X 66″D X 86″H
Temperature Range: -70 to +170 Deg C – Remote Air Cooled, 5 Deg. C Per Minute Ramp Rate, Non Linear
Humidity Range: 10% to 95% Relative Humidity
New Watlow F-4 Control, Over and Under Temperature Protection
2X 4″ Dia. Side Feed-Thru Ports
Stainless Steel Interior, Environmentally Friendly Refrigerants
Includes New Remote Air Cooled Condenser, New Compressors
Window, Castors, 1 Shelf
Power: 480V, 3Ph, 50 Amps
Temperature Test Chambers – 2 Just In – Temperature Only & Temperature Humidity
These 2 Test Chambers That Just Arrived Are In Excellent Condition And Can Ship Quickly.
Ransco Temperature Humdity Test Chamber
Model #1632
I.D. 36″ X 36″ X 42″
-65 to +170 Deg. C, 20% to 95% Relative Humidity
Stock #CH-252J
Russells Temperature Test Chamber
Model #RB-32-33
I.D. 38″ X 38″ X 38″
-65 to +170 Deg. C
Stock #253J
Thermotron Test Chambers – 5 Chambers Just Arrived – These Are Quality Test Chambers Mfg. by Thermotron – One of the Biggest Names In Test Chambers
Thermotron Temperature Test Chamber – 2 of These Available
Model #SE-600-3-3
I.D. 40″ X 26″ X 33″
-70 to +170 Deg. C
Click Here For More Info:
Stock #198J
Stock #213J
Thermotron Temperature Test Chamber
Model #S-16 
I.D. 30″ X 30″ X 30″
-70 to +170 Deg. C
Click Here For More Info:
Stock #217J
Thermotron Temperature Test Chamber
Model #SM-16S 
I.D. 30″ X 30″ X 30″
-30 to +170 Deg. C
Click Here For More Info:
Stock #194J
Thermotron Temperature Test Chamber
Model #SE-300-2-2 
I.D. 24″ X 26″ X 28″
-70 to +170 Deg. C
Click Here For More Info:
Stock #195J
Benchtop Test Chamber – Test For Temperature and Humidity
Tenney Benchtop Temperature Humidity Test Chamber
This Compact Test Chamber Can Simulate A Large 
Range of Temperatures and Humidity.
Inside Dimensions of 20″ X 20″ X 22″
Can Be Placed On A Tabletop OR We Can Also Supply A Quality Stand For Your Test Chamber
Click Here For More Info: 188J
Thermal Shock Test Chamber- Request Your Free Quote Now
This Thermal Shock Test Chamber Will Test Your
Product Using Extreme High and Low Temperatures
To Thermally Shock Your Product. Conduct The
Thermal Shock Tests You Need In Your Own Facility.
With A Workspace Of 15″ X 15″ X 15″ AND
Temperature Ranges from -65 to +170 Deg C
Thermotron Units Are Highly Desirable.
For More Info – Click Here: 181J






