ESS Environmental Test Chambers

Refurbished and customized

 

Free Quotes!
Call or email now!

1-800-574-2748








Category Class Stock No. Manufacturer Model No. Photo
Hot Cold Plates NH T100 ESS MRTP Used ESS MRTP

Mechanically Refrigerated Thermal Platform Systems
Model MRTP

The MRTP thermal platform systems rely upon a
closed loop mechanical refrigeration cooling system.
This eliminates the need for expendable refrigerants such
as liquid nitrogen and liquid carbon dioxide. Eliminating
the non-reusable refrigerants also eliminates the purchasing
cost and handling expenses, not to mention the associated
icing and water condensation.

The MRTP utilizes an efficient mechanical refrigeration system
that re-circulates the refrigerant in a closed loop system.
Only environmentally friendly zero-ozone depleting refrigerants
are used. Proprietary design features provide fast ramp rates
with efficient heat removal. The system is portable and a single
AC outlet is all that is needed to operate it. The system normally
uses an air-cooled condenser, which rejects a certain amount of
heat into the room. If a water cooling source is available, the
system can operate with a water-cooled condenser. If many
systems will operate in the same room a water cooling circuit
should be considered to remove the heat rejected by the
refrigeration cycle.



The MRTP utilizes an efficient mechanical refrigeration system that re-circulates the refrigerant in a closed loop system. Only environmentally friendly zero-ozone depleting refrigerants are used. Proprietary design features provide fast ramp rates with efficient heat removal. The system is portable and a single AC outlet is all that is needed to operate it. The system normally uses an air-cooled condenser, which rejects a certain amount of heat into the room. If a water cooling source is available, the system can operate with a water-cooled condenser. If many systems will operate in the same room a water cooling circuit should be considered to remove the heat rejected by the refrigeration cycle.

There are two types of MRTP systems. The first type is called single stage and uses one refrigeration loop to cool the thermal platform. The second type called cascade uses two refrigeration loops in series enabling the temperature of the thermal plate to be as low as -80ºC.
Spec sheet: ESS MRTP Hot Cold Plates spec sheet

Hot Cold Plates NH T700 ESS T700 Used ESS T700

Hot Cold Plate / Thermal Platform Model #T700

SPECS:
6.75" X 6.75" OR 11" X 11" Plate
Temperature Range: -99/65 to +200 Deg. C
LN2 or LC02 Cooled
115/230V

The T700-Series uses liquid nitrogen (LN2) or liquid
carbon dioxide (LCO2) cooled thermal platforms.
They utilize a premium integrated temperature controller
similar to the T650 but with more standard features
and offers a more traditional thermal plate form factor shape.

The T700 series of thermal platform systems feature the
PM6 temperature controller. The PM6 comes with everything
you need for state of the art thermal plate control. The only
option you may need is the GPIB-488 or the Ethernet/IP
Modbus TCP remote interface.

The PM6 comes standard with the following features:

Large easy to read dual display showing both
the current temperature and current set point
Programmable ramp to set point
Standard bus protocol EIA-485 serial communications
for use with the free Configurator software interface program.
Programmable ramp & soak profiling. Up to 4 profiles with
a total of 40 steps
Modbus RTU protocol EIA-232 serial communications
Second sensor for monitoring the device under test
(DUT) temperature Loomis-Logo-DnB_1

CONTROLLER OPTIONS:

GPIB-488 communications interface
Ethernet/IP Modbus TCP remote interface
Standard bus is a proprietary protocol for use
exclusively with the free Configurator software
interface program

To order a T700 thermal platform system you will
need to choose either a 6-3/4" X 6-3/4" or 11" X 11"
thermal plate size, 115 VAC or 230 VAC input facility power,
LN2 or LCO2 cooling, an optional communications interface
if desired and the destination country so we can include
the correct power cord and plug.

Stock #T700
Spec sheet: ESS T700 Hot Cold Plates spec sheet

Hot Cold Plates NH T650 ESS T650 Used ESS T650

Hot Cold Plate / Thermal Platform Model T650

SPECS:
6.75" X 6.75" OR 11" X 11" Plate
Temperature Range: -99/65 to +200 Deg. C
LN2 or LC02 Cooled
115/230V

The T650 Thermal Platforms are cooled using liquid
nitrogen (LN2) or liquid carbon dioxide (LCO2) and
utilize an integrated temperature controller.
With the lowest initial cost, the T650 Thermal Platforms
offer an excellent value.

All stainless steel chassis and with a powerful
integrated temperature controller. The T650
can be ordered with the standard or optional
premium temperature controller. The standard
controller has the following features:

Large easy to read dual display showing
both the current temperature and current set point
Programmable ramp to set point
Standard® bus protocol EIA-485 serial communications
for use with the free Configurator software interface program

The premium controller has the following additional features:

Programmable ramp and soak profiling. Up to 4 profiles with a total of 40 steps
Modbus RTU protocol EIA-232 serial communications
Second sensor for monitoring the device under test (DUT) temperature

To order a T650 thermal platform system you will need to
choose either a 6-3/4" X 6-3/4" or 11" X 11" thermal plate size,
115 VAC or 230 VAC input facility power, LN2 or LCO2 cooling,
The standard or premium controller and the destination
country so we can include the correct power cord and plug.

Stock #T650

Spec sheet: ESS T650 Hot Cold Plates spec sheet

Hot Cold Plates NH T600 ESS T600 Used ESS T600

Hot Cold Plate / Thermal Platform Model T600

SPECS:
6.75" X 6.75" OR 11" X 11" Plate
Temperature Range: -99/65 to +200 Deg. C
115/230V

The T600 Thermal Platforms are cooled using liquid nitrogen
(LN2) or liquid carbon dioxide (LCO2) and utilize a thermal
plate with a separate temperature controller cabinet.
They have the most standard, and optional features available
of all the T-Series Thermal Platform Systems and offer the
traditional form factor of a stand alone thermal plate with
a remotely located temperature controller cabinet.

Large easy to read dual display showing both the current
temperature and current set point.
Programmable ramp to set point
Standard® bus protocol EIA-485 serial
communications for use with the free
Configurator software interface program
Programmable ramp and soak profiling
Up to 4 profiles with a total of 40 steps
Modbus RTU protocol EIA-232 serial communications
Second sensor for monitoring the device under
test (DUT) temperature

Stock #T600
Spec sheet: ESS T600 Hot Cold Plates spec sheet

Other Test Equipment SC 740E ESS MRTP650 Used ESS MRTP650

ESS Thermal Platform Model MRTP650
Size of Temperature Plate: 6.75- x 6.75-
Temperature Range: -35C to +150C
Stock #740E

Total Results: 5