Used Test Equipment > Vibration Systems > Unholtz Dickie

Used Unholtz Dickie Vibration Systems

Refurbished and customized

We also offer New Equipment thru our Affiliate Company, LR Technologies. Our Sales Engineers are here to help you with your requirements and advise you on the right piece of equipment for your needs.

We provide equipment from manufacturers like Thermotron, Tenney, Blue M, Bemco, Delta Design, TestEquity, Envirotronics, VWR, Gruenberg, Grieve, CSZ, Espec, Despatch, Associated, Lunaire and Russells.

We stock Used Vibration Systems manufactured by:


Inventory of Used Unholtz Dickie Vibration Systems

Category Class Stock No. Manufacturer Model No. Photo
Vibration Systems VE VB59 UNHOLTZ DICKIE UDT1000 Used UNHOLTZ DICKIE UDT1000

Reconditioned Unholtz Dickie Vibration Test System With Amplifier

SPECS:
Generated Force: 16,000 Lbs Sine/12,000 Lbs Random
Armature Assembly Effective Weight: 95 Lbs
Maximum Table Acceleration: 100 G
Shaker Displacement 1.5" Pk to Pk
Shaker Table Suspension Stiffness: 3000 Lbs/inch Nom.
Combined Slip Table Assembly (CSTA): 48" X 48" Low Pressure Slip Table

POWER REQUIREMENTS: 480V, 3Ph (Shaker & Amplifier)
115V, 1Ph (Aux. Controls)
Water Cooling Requirements: Raw Water - 5.5 GPM @ 40 to 75 PSI (80 Deg. F Max)

Unit Can Be Upgraded To 2" Displacement
Crystal Controller Available At Additional Cost

**Note: Force Rating Based On Published Mfgs. Specs. Actual Specs May Differ Slightly**

Stock #VB59

Vibration Systems VE 840J UNHOLTZ DICKIE T-1000IAR Used UNHOLTZ DICKIE T-1000IAR

Unholtz Dickie Vibration System Model T1000IAR With
UD MA130 Amplifier

Specs:
Generated Force: 12,000 Lbs Sine/9,000 Lbs Random
Armature Assembly Effective Weight: 95 Lbs.
Maximum Table Acceleration: 100 G
Shaker Displacement: 1.0 Inch Pk to Pk
Shaker Table Suspension Stiffness: 3000 Lbs/inch Nom
Kimball Stand Alone Table Assembly: 36" X 36" Low Pressure Slip Table
Slip Table Grid Pattern: 4" x 4", 3/8-16 Bolt Pattern
Power Requirements: 480V, 3Ph (Shaker and Amplifier)
115V, 1Ph (Auxiliary Controls)
Water Cooling Requirements: Water, 5.5 GPM @ 40 to 75 PSI
(80 Deg. F Max)

Stock #840J

**Note: Force Rating Based on Published Mfg. Specs - Actual May Vary
Vibration Controller Not Included

Vibration Systems VE 353C UNHOLTZ DICKIE 106A-1/2 Used UNHOLTZ DICKIE 106A-1/2

Unholtz-Dickie Electrodynamic Vibration Shaker 106A-1/2
Exerts 300 Lbs of Force 1/2" Stroke
Amp-TA100A(cal)1/2(s/n: 195); AP Strip Chart
Control
Power: 208V, 3PH
Sold AS IS - Can be quoted Refurbished and Warranteed
Was working when pulled from service
Stock #353C

















Total Results: 3