New Industrial Ovens > Top Loading Ovens > LRE TL222
New Top Loading Ovens
TL222
The oven is designed to operate at 450°F maximum temperature and includes the following special features:
- 3” thick insulated walls, ceiling and floor
- 10” Circulation fan
- CRS exterior painted slate gray
- Aluminized interior
- UL listed Control Panel, 220/1/60 primary power
- Yokogawa UT150 single set point controller
- Zytron high limit
- Top load design with counter weighted door
Batch Oven Specifications
| Effective Work Area: | 2’ 0” W x 2’ 0” H x 2’ 0” L |
| External Dimensions: | 4’ 6” W x 2’ 8” H x 3’ 4” L |
| BTU: | 3 KW |
| Recirculation Fan: | 400 CFM; 1/15 HP |
| Electric: | o 220/1/60- 15 amps; 20 amp breaker suggested |
Oven Construction
Outside:
Oven to be constructed of heavy gauge carbon steel and painted a slate gray
Inside:
Oven to be constructed of Aluminized steel.
Circulation system:
A 10” Die fan will drive the air into the chamber from the right side plenum area. The air will be compound horizontal. All pressure and return walls will be louvered for adjustability.
Heating system:
1 - 3000W Incoloy sheathed heating elements will be housed in the plenum to heat the air to desired temperature.
Doors:
The unit will have one door held closed by a positive latch. The door will be a top load design and open from front to back. The door will be counter weighted.
Control Console:
The control panel for the oven will be on the right hand side of the chamber. The panel will house the electrical components and be NEMA 1 and UL rated.