Specifications
|
Brazed monolithic
thermal platform |
|
Extremely
efficient channel design |
|
Very fast
temperature ramp rates |
|
Controller
integrated in chassis |
|
Surface hard
plated for long wear |
|
Optional RS232/485
interface |
|
Optional external
IEEE 488 GPIB interface box |
The Integra family
of hot plates was designed to provide an affordable yet reliable
approach to conductive
thermal testing. They not only offer the lowest purchase cost but the
high quality construction assures the
lowest cost of ownership.
These hot plates are the quickest and most economical approach to
testing electronic components .
They are much faster than chambers and interconnecting and tuning of the
unit under test is easy.
The plate is heated by cartridge elements embedded in the plate. It is
cooled by the expansion of liquid
Carbon Dioxide (LCO2) or liquid Nitrogen (LN2) in an extremely efficient
channel hermetically sealed within
the plate. Two standard sizes are available (6.75”X6.75” & 11”X11”). The
plates are surface ground for
flatness and hard plated for durability.
A microprocessor-based digital indicating temperature controller is
integrated within the hot plate chassis,
making for a compact design. The controller has a dual LED display
showing both desired temperature and
current set point. The thermal ramp rate can be set via the front panel.
Two different remote communication options are available. Factory or
field installable RS 232/485 serial
interface or an external IEEE-488 GPIB interface can be supplied.
A latching failsafe is included in the hotplate to guard against thermal
runaway. The plates come
in a choice of 115 VAC or 230 VAC input.
Specifications:
|
MODEL |
USABLE
PLATE
AREA |
OVERALL
CHASSIS DIMENSIONS |
|
A (w) |
B (d) |
C (w) |
D (d) |
E (h) |
|
100 |
6.75"
(170mm) |
6.75"
(170mm) |
7.75" |
12.75" |
3" |
|
200 |
11"
(280mm) |
11"
(280mm) |
12" |
16.5" |
3" |
|
MODEL |
Temp
Range LCO2 |
Temp
Range LN2 |
Heating |
Cooling
LCO2 |
Cooling
LN2 |
Facility
110/
220VAC
60/50Hz |
|
100 |
-65°C
to +200°C |
-100°C
to +200°C |
1600
watts |
300 or
900 psi |
15-25
psi |
14/7A |
|
200 |
-65°C
to +200°C |
-100°C
to +200°C |
2000
watts |
300 or
900 psi |
15-25
psi |
17/8.5A |
Includes: Temperature plate with
integrated controller, valve, power supply cord and
operations manual
Accessories:
n
Clear polycarbonate
cover w/handle
n
Adapter plate
w/hardware
n
LCO2 Hose-6’ with
adapter fitting & filter
n
LN2 Hose-6’ insulated stainless steel
n
Low pressure supply
Nitrogen (GN2) purge system for desiccator
(Facility GN2 supply of 100 psi or less)
n
High pressure supply
Nitrogen (GN2) purge system for
desiccator (Facility GN2 supply of 100 to 2000 psi)
n
Desiccator for nitrogen
purge.
Controller Features:
l
Dual Digital LED Display
l
Optional Digital Communications EIA 232 or IEEE-488 GPIB
l
Fast 10Hz Sensor Sampling
l
Burst Firing Heating Mode
l
Nema 4X Sealed Front Panel
l
0.1% Sensor Calibration Accuracy
l
ISO 9001 Registered Manufacturing Process
l
Automatic Heating and Cooling Modes
l Sensor Break Protection
l
Programmable Ramp to Setpoint
|
