LR-IN085 Insect Growth Chamber

CABINET CONSTRUCTION:

• 300 series stainless steel front grill, shroud and doors. 300 series stainless steel exterior ends, top, back, and bottom.

• Interior – 300 series stainless steel interior cabinet side walls, back, door liner, and floor with coved corners.  Construction of liner in accordance with NSF standards

• Barrel lock standard for each door. Locks keyed alike.

• Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection.

• Frame rail fitted with 4" diameter casters, (front casters include brakes).

DOORS:

• 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.

• Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless steel supports. The face of each door fitted with a 12" long recessed handle with sheet metal interlock. Handles are foamed-in-place to insure permanent attachment.

INSULATION:

• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• Adjustable wire shelves (3 per door).

• Shelves capable of supporting up to 250 lbs.

LIGHTING:

• Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s).  Timed lighting available.

COOLING SYSTEM:

• Top mounted, thermoelectric cooling system.

• Peltier based technology is solid state, highly efficient, reliable.

• Semi-Redundant cooling capability.

• Cooling surfaces act as dehumidifying modules at 25°C/60%RH and above.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.